How to Replace a Kia Sportage Replacement Key
For many Kia models the key comes with an integrated keyless entry system. This key typically resembles an remote control, and is able to be replaced with a fresh one from a Kia dealer or locksmith.
Key fobs are prone to malfunction for a variety of reasons, such as an empty coin battery worn buttons signal interference, water damage and a damaged receiver module. Here are some helpful tips to assist you in getting your Kia key fob that is a replacement for the sportage again.
How to replace the remote key or smart key?
The battery in your Kia's intelligent key will eventually need to be replaced, regardless of whether it's a remote, a push-to-start key or a normal metal key that does not contain an electronic transponder. This is particularly true if the car displays a message that the smart or remote key has a low battery.
It's a simple process. In order to replace the battery on the key fob take out the mechanical key from the slit in the back of the key fob. You then need to break the cover. A small screw will be inside the key fob to hold the battery in its place. Take out the old battery by unscrewing the screw with the help of a small screwdriver. Then, insert the new and close the slit inside the key fob.
Test the key fob by pressing the lock and unlock buttons. You're good to go in case the doors lock and unlock as expected. You can now use the hands-free feature to lock and unlock your Kia when your fingers get chilly or when you need to run errands around Brandon.
Not all keys may require to be programmed (transponder chips or smart keys). This requires a computer, which is only available to the locksmith for cars or dealer. Other keys (non-transponder metal keys) do not require programming. If you're required to reprogramme your key, it is necessary to record the key code number on the tag for the key code.
How to replace a battery
If the Kia key fob does not respond to pressing the lock or unlock button, it's a sign that the battery is low. A low battery could cause other issues like the check engine light coming on or delayed cranking of the engine. Fortunately, replacing the key fob battery is a fairly simple DIY task that requires only some basic tools.
Before G28CarKeys begin the process, make sure that your vehicle is off and all doors are shut. Find the small metal or plastic piece on the bottom of your key fob, and gently jiggle it until the metal key slips out. You can then put the key into the handle of the door for the driver to unlock your car.
To replace the key fob's battery, take off the rear cover and use a pry bar tool to release the latch holding the black negative battery cable. Remove the old battery and then orient the new one so that the "+" positive side faces you and the "-" negative side is facing towards the fob's metallic electrical contacts. Avoid using too much force when pushing the new CR2032 into position to avoid damage or bending the metal contacts.
After you have installed the new battery after which you turn the key fob off and on in the ignition until the door locks cycle. You can then test your Kia's key fob again to confirm that it is working correctly.
How can you replace the smart key?
Depending on the model of the Kia Sportage, you may have an ordinary key fob or a smart key. The smart key comes with an embedded mechanical key blade, unlike the standard key fob, which does not. Both kinds of key fobs contain batteries that will eventually need to be replaced. This is a simple procedure that takes just two minutes.
Be sure to turn off your Kia and be on a level and well-lit surface prior to you begin. Also, remember that there are tiny components inside the fob that can be snagged if not careful.
The small release button is located on the lower backside. It can be an oval silver button or a rectangular slot. You can open the key fob by pressing the button.
Once the key fob is opened, take out the battery. The new battery is a CR-2032 that can be bought online or from your local auto parts store. After you've finished, you should be able to lock, unlock and start your car using your key fob even if your engine isn't running!
How to replace the mechanical key?
The Kia keyfob is a great convenience that allows us to lock or unlock our car simply by pressing one button. But like any device it may have issues from time to time. There are steps to take to resolve these issues and ensure that our key fobs are in good working order for the long term.
One of the most frequently encountered issues is a low or dead battery. This could cause the fob to stop working entirely or work intermittently. If this is the case, try replacing the battery with a fresh new one.
If this isn't enough to solve the issue, try using a flathead screwdriver standard to push the plastic casing of the fob open. Be careful not to damage internal components or scratch the plastic. After the battery has been removed, replace it with a brand new one.
Once the new battery is in, shut and open the doors with the mechanical key (every kia fob has an emergency mechanical key that can fit into the slot). Test the key fob and verify that it's working correctly. If the fob isn't functioning, contact a dealer or locksmith to solve the problem. Make sure they make you an emergency key that functions for all trunk and door cylinders to prevent lockouts in the future.